Home|Toolkits|Forums|Documents/Data|Links|About


Performance of Adhesive Joints



Template: Sidebar Layout

NPL logo
  Introduction
  Summary
  PAJ Extension
  Good practice guides
  Measurement Notes
Reports
  Modelling
  Contacts
  Materials Properties Solutions
  Useful Links
Other documents
 
 
Performance of Adhesive Joints

Reports

PAJ 3 : Combined Cyclic Loading in Hostile Environments

1. Review of durability test methods and standards for assessing long term performance of adhesive joints
Broughton W R and Mera R D - CMMT(A)61, 1997.
2. Review of life prediction methodology and adhesive joint design and analysis software
Broughton W R and Mera R D - CMMT(A)62, 1997.
3. A guide to the design of experiment methods
Hall M and Olusanya A - CMMT(A)67, 1997.
4. A comparison of commercial design of experiment software programmes for the analysis of durability data
Broughton W R, Mera R, Olusanya A and Tully K - CMMT(A)98, 1998.
5. The use of experiment techniques to determine the relative effectiveness of silane coupling agents on the durability of titanium alloy joints
Olusanya A - CMMT(A)128, 1998.
6. Environmental degradation of adhesive joints, single-lap joint geometry
Broughton W R, Hinopoulos G and Mera R D - CMMT(A)196, 1999.
7. Environmental degradation of adhesive joints, accelerated testing
Broughton W R and Mera R D - CMMT(A)197, 1999
8. Cyclic fatigue testing of adhesive joints, test method assessment
Broughton W R, Hinopoulos G and Mera R D - CMMT(A)191, 1999
9. An improved modelling approach of moisture absorption in adhesive joints using the Finite Element method
Broughton W R and Hinopoulos G - CMMT(A)204, 1999
10. Evaluation of the T-joint using the Finite Element method
Broughton W R and Hinopoulos G - CMMT(A)207, 1997
11. Fractographic analysis of adhesive joints
Broughton W R and Gower M R L - CMMT(A)205, 1999
12. Cyclic fatigue testing of adhesive joints, environmental factors
Broughton W R and Mera R D - CMMT(A)192, 1999
13. Cyclic fatigue testing of adhesive joints
Broughton W R, Mera R D and Hinopoulos G - CMMT(A) 193, 1999
14. Static fatigue testing of adhesive joints, analysis of creep rupture data
Broughton W R - CMMT(A)195, 1999
15. Evaluation of the single-lap joint using finite element analysis
Broughton W R and Hinopoulos G - CMMT(A)206, 1999
16. Statistical analysis of durability data
Twine T J and Hall M - CMMT(A)202, 1999
17. The use of statistical methods for evaluating durability of adhesively bonded joints
Twine T J and Broughton W R - CMMT(A)203, 1999
18. Test methods for assessing durability performance of adhesive joints
Broughton W R - CMMT(A)208, 1999
19. Project PAJ3: Final Report
Broughton W R - CMMT(A)237, 1999

The National Physical Laboratory, Queens Road, Teddington, Middlesex TW11 0LW, United Kingdom



Disclaimer