Home|Toolkits|Forums|Documents/Data|Links|About


Performance of Adhesive Joints



Template: Sidebar Layout

NPL logo
  Introduction
  Summary
  PAJ Extension
  Good practice guides
  Measurement Notes
Reports
  Modelling
  Contacts
  Materials Properties Solutions
  Useful Links
Other documents
 
 
Performance of Adhesive Joints

Reports

PAJ 2 : Dynamic Performance of Adhesively Bonded Joints

1. Adhesives- methods for preparing bulk specimens
Dean G D, Duncan B C and Simon H - CMMT (B)90, August 1996
2. Constitutive models and their data requirements for use in Finite Element Analysis of adhesives under impact loading
Charalambides M N and Dean G D - CMMT (A)59, April 1997
3. The thick - adherend shear test method
Dean G D - CMMT(A)81 August 1997
4. Prediction of the performance of adhesives under impact loading
Dean G D, Duncan B C and Read B E - CMMT(B)162 January 1998
5. The application of finite element methods to the design of adhesive joints
Dean G, Duncan B and Hu F - CMMT(A)102 March 1998
6. Development of a high rate extensometer
Duncan B C - CMMT(A)109 May 1998
7. An evaluation of yield criteria for adhesives for finite element analysis
Dean G D, Duncan B C and Read B E - CMMT(A)117 January 1999
8. Methods for measuring strains at high rates
Duncan B C - CMMT(A)133 November 1998
9. Comparison of impact and high rate tests for determining properties of adhesives and polymers needed for design under impact loading
Duncan B C and Pearce A - CMMT(A)134 January 1999
10. A proposed failure criterion for tough adhesives
Dean G D and Crocker L E - CMMT(A)158 February 1999
11. Strain rate and temperature dependence of the properties of adhesives prediction of high- rate data
Dean G D, Read B E and Duncan B C - CMMT(A)169 March 1999
12. Comparison of the measured and predicted performance of adhesive joints under impact
Dean G D, Lord G and Duncan B C - CMMT(A)198, October 1999

The National Physical Laboratory, Queens Road, Teddington, Middlesex TW11 0LW, United Kingdom



Disclaimer