IAG minutes and presentations
Fourth IAG Meeting (20 November 2003)
Introduction and agenda. Materials qualification at Airbus UK. Long-term loading of adhesive joints. Predicting deformation and failure in adhesive and bolted joints. Design & failure of materials systems under multi-axial loads. Towards an adhesive design toolkit. A review of current trends in surface pre-treatment prior to structural adhesive bonding. Interfacial adhesion strength. NMS materials programmes an update.
Third IAG meeting
The agenda for the IAG meeting on 30 April Minutes from presentation delivered Wednesday 30 April 2003 1st presentation an overview of MMS7 (Adhesion and adhesives IAG meeting), TWI 2nd presentation, MMS8 (Interfacial adhesion strength), NPL 3rd presentation, MMS11 (Design for fatigue and creep in joined systesm), NPL 4th presentation, MMS7 (A database for adhesives), NPL 5th presentation, Introduction of proposed NMP programme, NPL
Second IAG meeting
Presentation delivered Wednesday 04 December 2002 The slides used by Ewen Kellar in the Second IAG meeting. Presentation delivered Wednesday 04 December 2002 The slides used by John McCarthy in the Second IAG meeting. Presentation delivered Wednesday 04 December 2002 The NPL slides used in the Second IAG meeting. Minutes from presentation delivered Wednesday 04 December 2002
First IAG meeting
Presentation delivered Wednesday 17 July 2002 The slides used by Ewen Kellar in the first IAG meeting. Minutes from presentation delivered Wednesday 17 July 2002