 |  |  | |  | |  | |  | |  |
Welcome to the adhesives test standards module.
This module lists and describes all of the main test standards associated with adhesives materials. For completeness, the three major standards systems, ASTM (American Society for Testing Materials), BSI (British Standards Institution) and ISO (International Standards Organisation) are covered.
All the standards are listed according to number and title and are sub-grouped according to type of data that will be generated i.e. mechanical properties, physical properties etc. A short summary of each standard is also provided which can be accessed either via a link from each number/title by going directly to relevant section from the standards page below.
Go to the STANDARDS page
IMPORTANT NOTE
Standards are evolving documents and as such are subject to change at short notice. All information relating to the standards described was deemed correct at the time it was put on the toolkit web-site - for further information please see disclaimer notice at the bottom of this page.
This site only provides the number/title and a short description of each standard. It does NOT hold any copies of the standards themselves as these are held and supplied by the standards bodies themselves. A single point source of standards ensures that the copies supplied are fully up to date with all revisions/amendments. To obtain a copy of the relevant document please contact the relevant bodies directly:
ASTM
ASTM International
100 Barr Harbor Drive
PO Box C700
West Conshohocken
PA
19428-2959
USA
Phone: (610) 832-9585
Email: service@astm.org
Fax: (610) 832-9555
http://www.astm.org
BSI
389 Chiswick High Road
London
W4 4AL
United Kingdom
Phone: +44 (0)20 8996 9000
Email: cservices@bsi-global.com
Fax: +44 (0)20 8996 7001
http://www.bsi-global.com
ISO (UK) [other country's ISO contact details can be found on the ISO web-site]
389 Chiswick High Road
London
W4 4AL
United Kingdom
Tel. + 44 (0)20 8996 9000
Email:standards.international@bsi-global.com
Fax + 44 (0)20 8996 7400
http://www.iso.org